New vs. Old Locks: A Practice Guide to Lock Selection

It can occasionally be more difficult to choose the next practice lock to crack than the actual lock itself. There are so many choices, brands, and occasionally even colors. This may be accomplished with lockpicking by just knowing which practice lock to concentrate on first. Each practice lock you open teaches you something new, a lesson you only learn through the tears and tribulations of lockpicking. At, you can also get sufficient Lock Picking Tools to distinguish between new and old locks.

Used lock

A used lock can be used for the following things in addition to having a rusty smell, broken parts, and outdated money.

Happy piggy bank

Cost is, of course, the first and most evident aspect of purchasing practice locks. Sifting through mountains of trash to find a few locks worth picking out can be a difficult effort at times, but if you use this method, you can save a lot of time and get several very excellent locks for the price of one. new lock that is good.


Additionally, as the key forcefully scrubs and scrapes the internal parts of the lock, it flattens the tips of the pins on the key, causing further rubbing and erosion. Each needle’s body experiences unequal diameter reduction as it rubs against the chamber walls, which might result in a dynamic binding order. When the pins move up and down the walls, they also begin to rub off.

Uneven wear

A needle will begin to corrode in the same way—that is, unevenly—if it is rubbed in the same direction for a long enough period of time. As a result, the pin will develop a thinner side on one side. As a result, you will have a pin whose binding order is flexible.

A pin’s thickness has a role in establishing the binding sequence. The pin binds later if the pin is turned to expose the thinner side and then picked up. In conclusion, the erratic behavior of used locks can be entertaining as well as annoying.


Older locks, particularly those that have been exposed to the elements, may have some accumulation that somewhat or significantly increases friction between some or all of the parts. Dirt, dust, worn-out brass fragments, or even dry lubricant that has turned sticky can all contribute to this buildup. Feedback will effectively be reduced if there is increased friction inside the lock, especially if the friction is caused by a viscous substance.

New lock

Many properties of the lock are diametrically opposed to the used locks.

Lively and sensitive

A brand-new lock has the advantage of being fast and responsive with little wear and friction. Every edge that should have an edge will have one, and everything that should be round will be round. You’ll receive more feedback from newer practice locks because of this brittleness.

Tighter tolerances

The tolerances are unquestionably the tightest because new locks have the least amount of wear. In the core and needle chambers, there are hardly any slopes. A lockset with a great profile is essential since the key pins will have sharper tips that cause some slide between the tip of your pick and the pin. Moreover elastic will be the spring.

New technology

Although it may appear that modern locks should be more safe than older ones because advancements in technology and security features are typically brought about by time, this isn’t always the case. Since certain manufacturers started to skimp on component quality, several subsequent models of the lock have gotten worse over time. So, a lock’s age or “freshness” is a misleading indicator of its efficiency and difficulty.

Picking up an old lock and cleaning them can be great if you’re new to locks and want to spend as little money as possible on your locks. Check out our fantastic variety of Locksmith Tools at if you’re curious about all types of locks.